* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. herefore it is usually necessary to allow for a blank metal rim (0.3mm minimum).

* The standard colors are based on the Pantone Chart.

For budget considerations, iron material can be used instead of copper, but without polishing.

For Best Results

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small and will require an additional silk-screen printing process.

* General enamel coloring requires a surrounding metal space to ensure good quality painting results. Therefore it is usually necessary to allow for a blank metal rim ( 0.3mm minimum ). If you require full-piece coloring, a special printing process is necessary.

* The standard colors are based on the Pantone Chart.

* Bolder designs are recommended in order to prevent any unsatisfactory coloring caused by lines and figures that are too thin or too small.

* Artwork provided by the customer must be in perfect condition with clear color indication.

* It is necessary to indicate the color required for the surrounding rim. Standard option: metal color and white.

* The standard colors are based on the Pantone Chart.

* Normally, pin manufacturers supply offset printing with a resolution in the range of 125 to 175 lines depending on the complexity of the design. However, at Scorpion, our advanced equipment starts at 175 lines and can provide up to 250 lines resolution. So, if you need a higher resolution than 175 lines, please let us know and, for a small surcharge, we will provide you with much a clearer and brighter offset pin compared with our competitors’ product ! Right now, Scorpion is the only factory that can print offset pins with 250 lines resolution!

* Artwork provided by the customer must be in perfect condition.

* It is necessary to indicate the color required for the surrounding rim. Standard option: metal color and white.

* The colors are based on actual colors of the original artwork or files in C. M. Y. K. color format and a minimum resolution of 400dpi.

For 3D items, please offer the artwork with front and side view.

For 3D items, please offer the artwork with front and side view.